1. The fast-recovering TM tip can be installed in a full range of models for the future trend of “lead-free soldering”. The high-precision thermocouple is located at the forefront of the soldering iron. Therefore, it is possible to sense subtle changes in the temperature at the tip of the tip.

It can reach 300 degrees C in six seconds. The card-designed tip is quick to change and easy to use. The variety of soldering irons can quickly solve difficult soldering processes.

2, anti-tin explosion delivery tin ZSB can be installed in a full range of models in the precision of tin, while the knife-shaped gear on the side of the wire protrudes small to prevent the flux from seeping, so that the solder will not help ...

1. The fast-recovering TM tip can be installed in a full range of models for the future trend of “lead-free soldering”. The high-precision thermocouple is located at the forefront of the soldering iron. Therefore, it is possible to sense subtle changes in the temperature at the tip of the tip.

It can reach 300 degrees C in six seconds.

The card-designed tip is quick to change and easy to use.

The variety of soldering irons can quickly solve difficult soldering processes.

2, anti-tin explosion delivery tin ZSB can be installed in a full range of models

At the same time of precision tin feeding, the knife-shaped gear protrudes on the side of the tin wire to prevent the flux from oozing out, so that the soldering process does not cause a "tin explosion" due to the boiling of the flux, thereby ensuring the cleaning of the welded portion, and will not Flux balls generated by flux or tin explosion affect other sensitive components on the PCB.

3. The RSP/RSL soldering iron group RSP and RSL with auxiliary tin feeding function are designed for automatic soldering.

The feeding position of the secondary tin feeding of the tip of the soldering iron can be adjusted by adjusting the upper and lower positions of the positioning parts. The first stage of sending tin can pre-stick the soldering iron or the soldering part, which makes the welding result faster and more perfect.

4. Automatic soldering machine for card type soldering iron group which can directly blow nitrogen gas

1. Put the automatic soldering machine on a dry, stable, non-corrosive workbench.

2. When using the automatic soldering machine, it is necessary to determine the working power supply voltage to meet the requirements of the machine.

3. When the automatic soldering machine is working, put the soldering iron into the soldering iron frame, insert the power plug, and turn on the temperature control switch.

4. According to the needs of the product, select the appropriate conduit into the fixed pipe hexagonal column, and then tighten with screws.

5, the foot switch should be placed where the foot is easy to operate.

6. Put the tin wire in the tin seat and introduce the tin guide.

Automatic soldering machine must pay attention to maintenance when using, which can extend the life of the machine:

1. Do not put corrosive substances such as salt, acid and alkali on the automatic soldering machine.

2. Wipe the automatic soldering machine with a dry cloth before going to work every day.

3. When the automatic soldering machine is not used for a long time, unplug the power plug to prevent the machine from burning out for too long.

4. Before going to work every day, wipe off the residue of excess tin slag on the tip with sponge and unplug the power plug.

5. Parts on the automatic soldering machine cannot be forcibly removed.

6, can not destroy the automatic soldering machine and soldering iron device.

7. Non-professional maintenance personnel should not open the machine privately.