Instructions for sharing the operation program of the double-flying fork winding machine: A reasonable program of the winding machine manufacturer and successful operation is the basis for determining whether the whole system function is intact or not. Some winding parameter setting errors may cause system failure or certain function. Invalid, sometimes due to user program error caused by the failure, this can be used to prepare a trial run program to check, correct the user program error to ensure its normal operation.
Making good use of the adjustable components such as the tension of the winding, the screen voltage, the adjustment of the starting position of the cable tray, etc., is an easy and simple method in maintenance. Correct some innocuous faults by adjusting the adjustable parts.
For example, if a winding machine that has been used for many years is repaired in a certain enterprise, the system display screen is dim, and it is normal after adjusting the screen power supply voltage. Spare parts replacement method Winding machine manufacturers in the maintenance of the winding machine, replace the suspected parts with the used spare parts, after the maintenance personnel basically judge the cause of the failure, this method can be used to quickly diagnose the fault range and make the winding machine quickly input Normal operation, then return the bad parts to repair, which is currently the most common troubleshooting method.
Improvement of the environmental quality law For some very strange faults, the exclusion method can not find the reason, often need to start from the surrounding environment, the environment is generally divided into two types, power and space. The power supply can be improved by using a regulated power supply to improve the fluctuations from the power supply. For some high-frequency interference from the power supply, capacitor filtering can be used. These preventive measures are used to reduce the fault caused by the power supply, increase and check whether the grounding is good. It is also very necessary.
There are many reasons for space disturbances, such as dust, gas, grounding, vibration, space radiation interference, etc., which require experienced maintenance technicians and professional equipment to detect and maintain.
According to the actual work of the winding machine and the previous fault record, the maintenance information tracking method can find that the accidental failure caused by the winding machine design or production process defects can be solved by continuously modifying and perfecting the system software or hardware.
In short, the first step of the repair of the winding machine is to determine the real cause and the fault location of the fault as soon as possible according to the fault phenomenon. These fault handling methods have no strict limits in practical use, and sometimes can be eliminated by only one method. Failures may also require multiple methods to be performed simultaneously.
The effect of the winding machine manufacturer depends mainly on the experience of the service technician and its understanding and mastery of the system principle and structure. This is not only the quality that maintenance personnel must possess, but at the same time it puts high demands on the maintenance personnel. It requires the CNC winding machine maintenance personnel to be familiar with the structure and design idea of the winding machine and familiar with the performance of the CNC winding machine. In this way, it is possible to quickly find out the cause of the fault and determine the location of the fault. In addition, in order to carry out on-site surveying of certain circuits and parts during maintenance, as a senior maintenance personnel, it is also necessary to have the ability to draw engineering drawings.